2. Adımdaki Değişiklikler
Düzenleyen: Nicholas Greco —
Düzenleme onaylandı tarafından Nicholas Greco
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* red] Using the Blunt Tweezers, remove the spring via the same method outlined in the previous step. | |
| - | [* black] Firmly grasp the print rail and gently |
| + | [* black] Firmly grasp the print rail and gently guide it out of the slot in the fuser assembly by pulling away from the printer body. |
| [* icon_note] Because this rail is what guides the printhead, it will be greased. Dress accordingly to avoid unwanted stains. | |
| [* icon_note] Because the printhead sits on this rail, be sure to brace the printhead as you retract the print rail to avoid any unwanted damage. |