2. Adımdaki Değişiklikler
Düzenleyen: Kristen Gismondi —
Düzenleme onaylandı tarafından Kristen Gismondi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* red] Using the |
|---|---|
| + | [* red] Using the blunt tweezers, remove the spring via the same method outlined in the previous step. |
| [* black] Firmly grasp the print rail and gently guide it out of the slot in the fuser assembly by pulling away from the printer body. | |
| [* icon_note] Because this rail is what guides the printhead, it will be greased. Dress accordingly to avoid unwanted stains. | |
| [* icon_note] Because the printhead sits on this rail, be sure to brace the printhead as you retract the print rail to avoid any unwanted damage. |