3. Adımdaki Değişiklikler
Düzenleyen: Nicholas Greco —
Düzenleme onaylandı tarafından Nicholas Greco
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* red] Using the T9 Torx screwdriver, remove the ( mm) screw. |
|---|---|
| - | [* black] Grasp the black, elastic band firmly and pull out and away from the white plastic pulley. |
| - | [* black] You should now be able to lift the printhead from the printer |
| + | [* red] Place the T9 Torx screwdriver in the screw slot and turn counterclockwise to remove the single 12 mm screw. |
| + | [* black] Grasp the black, elastic band firmly and pull out and away from the white plastic pulley; the printhead can now be lifted out of the printer. |