Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Miroslav Djuric

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* red] Remove the four 3.4 mm Phillips screws from the DVI connector side of the PowerBook.
[* icon_reminder] When replacing these screws, you must reinstall each screw in the correct order. Begin by installing the screw closest to the display hinge, and go out from there.
[* icon_note] During reassembly, do not reinstallmake sure to reinstall the two screws on the right into their appropriate locations, and not the DVI port anchor holes.
[* icon_note] During reassembly, do not reinstallmake sure to reinstall the two screws on the right into their appropriate locations, and not the DVI port anchor holes.