5. Adımdaki Değişiklikler
Düzenleyen: Jeff Suovanen —
Düzenleme onaylandı tarafından Jeff Suovanen
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* black] Grab one of the outer battery adhesive tabs and slowly pull it away from the battery, toward the bottom of the iPhone. |
|---|---|
| + | [* black] Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case. |
| + | [* icon_note] The strip will stretch to many times its original length. Continue pulling and re-grab the strip near the battery if necessary. |
| + | [* icon_note] If the battery adhesive tabs break during the removal process, use your fingers or blunt tweezers to retrieve the remaining length of adhesive, and continue pulling. |
| + | [* icon_caution] If any of the adhesive strips break underneath the battery and cannot be retrieved, try to remove the remaining strips, and then proceed as instructed below. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi
Resim 3
Önceki resim yok
Eklendi