Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Adam O'Camb —

Düzenleme onaylandı tarafından Adam O'Camb

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_note] The PRAM battery is secured by a spring contact and two small plastic nubs.
[* black] Gently pushOn the side between the two plastic nubs (opposite the spring contact), gently slide an opening pick in between the battery socket wall and the battery.
[* black] Use the opening pick to slide the battery away from the two plastic nubs. (This puts increased pressure on the spring contact at the other end.)
[* black] Once the battery's edge clears the two nubs, use the opening pick to tilt itthe battery up out of its socket.
[* black] Gently pushOn the side between the two plastic nubs (opposite the spring contact), gently slide an opening pick in between the battery socket wall and the battery.
[* black] Use the opening pick to slide the battery away from the two plastic nubs. (This puts increased pressure on the spring contact at the other end.)
[* black] Once the battery's edge clears the two nubs, use the opening pick to tilt itthe battery up out of its socket.