Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

4. Adımdaki Değişiklikler

Düzenleyen: Jessica Pickering

Düzenleme onaylandı tarafından Jessica Pickering

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Remove Battery
[* black] Use extreme caution when removing the battery. It is directly against the motherboard, and piercing the battery could corrode other components. It could also catch flame.
[* black] Take off the battery shield, and use a scalpel or other flat tool to remove the foam on the connector. Place these onto new battery.
[* black] Carefully apply some low heat to the stickers covering the battery and gently peel them off. The white sticker is connected to adhesive under the battery.
[* black] Gently pry up on the edges of the battery so that the adhesive will come out more easily. Take great care not to pierce the black "skin" on the battery.
[* black] Slowly start pulling the adhesive tab out, regripping close to the battery as it starts to come out.

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi

Resim 3

Önceki resim yok

Eklendi