Bu Adımdaki Değişiklikler
Düzenleyen: Martin Refseth —
Düzenleme onaylandı tarafından Martin Refseth
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Opening the joy-con | |
| [* black] Start off by unscrewing the 4 screws at the back using a Tri-Point Y00 Screwdriver. | |
| - | [* black] ***Carefully*** separate the two halves (be gentle, as you risk damaging the ribbon cables in the joy-con if you're rough with them), and unscrew the one screw holding the |
| + | [* black] ***Carefully*** separate the two halves (be gentle, as you risk damaging the ribbon cables in the joy-con if you're rough with them), and unscrew the one phillips screw holding the rear shell in place. |