Bu Adımdaki Değişiklikler
Düzenleyen: Martin Refseth —
Düzenleme onaylandı tarafından Martin Refseth
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Installing the new buckle lock | |
| - | [* black] First, make sure you have the correct buckle lock, there are two variants, one with the slope on the right side, and one with the slope on the left side. |
| + | [* black] First, make sure you have the correct buckle lock, there are two variants, one with the slope on the right side, and one with the slope on the left side. In the first picture you can see the left and right buckle locks. |
| [* black] Push the new buckle lock back into place while putting some pressure on the spring to make sure it won't fly off on you, and put the metal cover back on, make sure not to tighten this screw too much, as your release button may get stuck. | |
| [* black] You can now re-assemble your joy-con(s). |