3. Adımdaki Değişiklikler
Düzenleyen: Monica Hurwitz —
Düzenleme onaylandı tarafından Monica Hurwitz
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
- | [* black] After prying the cover off of the back, you will see three ribbons connected to the cover and the components of the laptop. Simply pull the ribbons gently to disconnect. |
---|---|
- | [* black] Disconnect the ribbon which is above the hard drive. |
- | [* icon_note] The ribbons will stay apart of the cover so disconnect them from the component of the laptop. |
+ | [* red] After prying the keyboard unit off of the base, you will see three ribbons connected to the components resting within the base of the laptop. Lift the white, hinged covers connected to the white ribbons and pull gently to disconnect. |
+ | [* orange] Disconnect the black ribbon by pulling gently. |
+ | [* yellow] When the keyboard unit is disconnected, lift the white, hinged cover attached to the white ribbon (remember the white ribbon is connected to the USB ports on the right side) and disconnect by pulling gently. |
+ | [* icon_note] When putting the laptop back together, lift the hinged covers and connect the ribbons before dropping the hinged covers back down. |