Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Colin Tourjee

Düzenleme onaylandı tarafından Colin Tourjee

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] WithLocate the front ofthree screws which hold the printer facing you, lift and raisecircuit board in place.
[* black] Remove each screw using a screwdriver with
the left side ofT10 torx bit.
[* black] Replace
the panel (like openingcircuit board with a book in reverse) until it disconnects from the clip on the right side of the panelnew one.
[* black] WithLocate the front ofthree screws which hold the printer facing you, lift and raisecircuit board in place.
[* black] Remove each screw using a screwdriver with
the left side ofT10 torx bit.
[* black] Replace
the panel (like openingcircuit board with a book in reverse) until it disconnects from the clip on the right side of the panelnew one.