Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Colin Tourjee

Düzenleme onaylandı tarafından Colin Tourjee

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Locate the three screws which hold the circuit board in place.
[* red] Remove the top two 13mm screws using a screwdriver with the T10 torx bit.
[* orange] Remove the bottom 9mm screw using a screwdriver with the T10 torx bit.
[* black] Replace
bit, and remove the plug port circuit board with a new one unless this step is being done in order to replace another partboard.
[* orange] Remove the bottom 9mm screw using a screwdriver with the T10 torx bit.
[* black] Replace
bit, and remove the plug port circuit board with a new one unless this step is being done in order to replace another partboard.