Eşyalarını Tamir Et Topluluk Mağaza

5. Adımdaki Değişiklikler

Düzenleyen: Kristen Gismondi —

Düzenleme onaylandı tarafından Kristen Gismondi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] The body around the printer needs to be taken off too, to get to the inside of the printer and to be able to reach the inner parts better.
-[* black] The sides of the left and right side of the body can be removed, it's connected with snapfits.
+[* black] The body around the printer needs to be taken off to get to the inside of the printer and to be able to reach the inner parts better.
+[* black] The left and right side of the body can be removed; they're connected with snapfits.
[* icon_note] The screws that are twirled out in step 3 are connected to this part of the body. That is why you can take the side off by hand and spudger.