Ana içeriğe geç

10. Adımdaki Değişiklikler

Düzenleyen: Martine

Düzenleme onaylandı tarafından Martine

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Next up is to remove the print board, step 10 till 13 will be about this.
+[* black] Next up is to remove the print board, step 10 till 13 will explain how to do this.
[* black] The print board is connected with 7 screws and 3 wires.
[* black] The flat gray wire is connected to two small motherboards. One of the motherboards is connected with one screw and the other is clicked in.
[* black] Slide the first mother board out of its case and unscrew the one that is connected to the print board.