Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

4. Adımdaki Değişiklikler

Düzenleyen: oldturkey03

Düzenleme onaylandı tarafından oldturkey03

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Insert wisdom hereCut about 3 inch of the end of the cable.
[* red] To make sure that it was indeed the connector, and not a cracked wire further up, remove the insulation of one set of wires. The Lowrider uses one set for each side. to remove the insulation, you can use a boxcutter, a sharp knife, or a lighter etc.
[* blue] Attach the test lead from any MP3 player, as previously shown. If the reason for the non-functioning headphones was the connector, there should now be sound on the headphone speaker (driver). In this case, there was. Therefore, it was indeed the audio connector that was broken
.
[* black] Insert wisdom hereCut about 3 inch of the end of the cable.
[* red] To make sure that it was indeed the connector, and not a cracked wire further up, remove the insulation of one set of wires. The Lowrider uses one set for each side. to remove the insulation, you can use a boxcutter, a sharp knife, or a lighter etc.
[* blue] Attach the test lead from any MP3 player, as previously shown. If the reason for the non-functioning headphones was the connector, there should now be sound on the headphone speaker (driver). In this case, there was. Therefore, it was indeed the audio connector that was broken
.

Resim 2

Eski Sürüm

Yeni Sürüm

Resim 3

Eski Sürüm

Yeni Sürüm