Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

7. Adımdaki Değişiklikler

Düzenleyen: Jake Devincenzi

Düzenleme onaylandı tarafından Jake Devincenzi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Most MP3 players, including the iPod, use the Tip for the left channel. Solder the Blue wire to the tip connector, the Red wire to the Ring connector, and both Gold wires to the Sleeve connector.
[* blue] AllWhen all wires are soldered to their respective connectors, squeeze the cable tab at the sleeve connector tight around the cable. This helps to keep the solder connection when the headphones get disconnected by pulling on the wire.
[* blue] AllWhen all wires are soldered to their respective connectors, squeeze the cable tab at the sleeve connector tight around the cable. This helps to keep the solder connection when the headphones get disconnected by pulling on the wire.
[* black] Attach the cover to the audio jack connector.