4. Adımdaki Değişiklikler
Düzenleyen: Nat McCormick —
Düzenleme onaylandı tarafından Nat McCormick
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Insert prying tool at indicated locations to disengage plastic tabs from housing to cover. |
|---|---|
| - | [* black] As the tabs are released use prying tool to separate the back cover from the main housing. |
| + | [* black] Insert spudger at indicated locations to disengage plastic tabs from housing to cover. Begin to pry apart the cover as you disengage the tabs. |
| + | [* black] Use spudger to pry cover around I/O ports such as USB and mini display port. |
| + | [* black] Continue around the entire perimeter of the cover with the spudger. The cover should be separating from the housing as you work around the perimeter. |