Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Gregory Caporale

Düzenleme onaylandı tarafından Gregory Caporale

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[title] Removing the back frame
[* black] To remove the back frame there are a series of screws all around the outside. I believe they are Torx T3 or T4. Some of the screws on mine needed T3 and some needed T4.
[* black] DO NOT REMOVE the screw highlighted in Orange. That is the screw that holds in the rocker button for the volume. Leave that one in as it only is attached to the back frame.
[* black] Once all the screws are removed you can use the spudger to release two catches and release the back frame from the front assembly.
[* black] I also had to go around the entire metal frame and lightly pry the two sections apart.
[* black] Once that is done you are left with two pieces. The back frame which will still contain the battery. And the front assembly which contains the motherboard and the LCD assembly.

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi

Resim 3

Önceki resim yok

Eklendi