Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Insert a thin blade or pry tool into the camera notch at the top of the display.
- [* icon_note] The gap where you can safely insert a tool is only about 5 mm wide. Refer to [this image] and note the contours of the display panel. If you hit the LCD with your tool, you will damage it.
-[* black] Use your suction cup and blade or pry tool to widen the gap at the top of the display until you can insert a second tool under the glass, close to the corner.
+ [* icon_note] The gap where you can safely insert a tool is only about 5 mm wide. If you hit the LCD with your tool, you will damage it.
+[* black] Use your suction cup and blade or pry tool to widen the gap at the top of the display until you can insert a second tool under the glass, closer to the corner.