Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Monte Roden

Düzenleme onaylandı tarafından Monte Roden

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Pull the 4 pin female connector from the male connector attached to the motherboard.
+[* black] Remove the 4 pin female connector from the male connector attached to the motherboard.
[* black] Lift the DC power port from the bracket holding it in place.
+[* black] There are black plastic housings for the wires, holding the wires in position. Remove the red and black wires connecting the DC Port to the 4-pin power connector from underneath the black plastic housings.
+[* black] Remove the DC Power port and 4 pin connector.