DBPOWER RD-810 Motherboard and LED Bulb Replacement 2 No'lu Adım Geçmişi

2. Adımdaki Değişiklikler

Düzenleyen: John Russell — 2 Nis 2018

Düzenleme onaylandı tarafından John Russell

	[* yellow] Disconnect the three wire connectors. Grasp both sides of the connector and pull apart.
	[* icon_note] Keep the connector parallel to the mother board to avoid breaking the solder connection.
-	[* black] Lift the motherboard up and ~~turn~~ it ~~over. Desolder the white and black wires attached to the bottom~~ of the ~~mother board~~.
+	[* black] Lift the motherboard up and place it out of the way.