Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Tim M

Düzenleme onaylandı tarafından Taylor Dixon

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Flip your laptop over so that the bottom is facing you.
[* red] Remove the nine 4mm Phillips #00 screws from the back panel.
+[* black] Remove the two black rubber pads at the rear corners of the laptop near the screen hinge. They are attached with adhesive and can be pried off with a plastic removal tool or flat head screwdriver.
+[* black] Remove the two screws from where the rubber pads were attached.