Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Tarun Thiruma

Düzenleme onaylandı tarafından Tarun Thiruma

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_caution] Ensure your device is completely off before performing this procedure.
[* black] Flip your laptop over so that the bottom is facing you.
-[* red] Remove the eleven 4mm Phillips #00 screws from the back panel.
- [* icon_note] Two of the screws are underneath the black rubber pads near the laptop's hinge. Remove these pads using a pry tool.
+[* red] Remove the eleven 4 mm Phillips #00 screws from the back panel.
+ [* icon_note] Two of the screws are underneath the black rubber pads near the laptop's hinge. Remove these pads using a spudger or pry tool.