Samsung Galaxy S7 Edge Rear Glass Replacement 2 No'lu Adım Geçmişi

2. Adımdaki Değişiklikler

Düzenleyen: Adam O'Camb — 4 May 2018

Düzenleme onaylandı tarafından Adam O'Camb

	[* black] Once the back panel is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can while avoiding the curved edge.
	[* icon_note] The suction cup will not adhere well on the curved portion of the glass.
+	[* icon_note] If the phone's back cover is cracked, the suction cup may not stick. [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU\|Try lifting it with strong tape\|new_window=true], or superglue the suction cup in place and allow it to cure so you can proceed.
	[* black] Lift on the suction cup and insert an opening pick under the rear glass.
	[* icon_note] Due to the curved glass, you will be pushing up, rather than inserting parallel to the plane of the phone.
+	[* icon_note] If you have trouble, apply more heat to further soften the adhesive, and try again. The adhesive cools very fast, so you may need to heat it repeatedly.