Eşyalarını Tamir Et Topluluk Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: Brandon McGuffey —

Düzenleme onaylandı tarafından Brandon McGuffey

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* orange] Where you removed the 10 rubber caps, use a ### screwdriver to remove the 10 ### Phillips head screws, as well as the remaining # ### Phillips head screws around the hard drive casing.
-[* yellow] Remove the ### Phillips head screw that was under the hard drive (bottom), then the three ### Phillips head screws that were under the battery (top).
+[* orange] Where you removed the 10 rubber caps, use a #0 Phillips head screwdriver to remove the 10 3mm Phillips head screws, as well as the remaining three 3mm Phillips head screws around the hard drive casing.
+[* yellow] Remove the 2mm Phillips head screw that was under the hard drive (bottom) with the #0 Phillips head screwdriver, then the three 2mm Phillips head screws that were under the battery (top).