Eşyalarını Tamir Et Topluluk Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Tim Sanchez —

Düzenleme onaylandı tarafından Tim Sanchez

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] 2) Locate the gray band that you removed the screws from. This holds the two halves of the camera together. Use an ipod fixit tool to pry the gray band loose and remove it. Then use the ipod fixit tool to carefully separate the front and back of the camera.
+[* black] 2) Locate the gray band that you removed the screws from. This holds the two halves of the camera together. Use an ipod fixit tool to pry the gray band loose and remove it. Then use the same tool to separate the back panel from the camera as seen in step 4.