Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Austin Gross

Düzenleme onaylandı tarafından Austin Gross

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Locate the rubber feet at every corner of the laptop back panel. Use the ifixit prying tool, and break the adhesive between the rubber feet, and the case.
+[* black] Locate the rubber feet at every corner of the laptop back panel. Use the ifixit prying tool, and break the adhesive between the rubber feet, and the case.
[* icon_note] Screws securing the back panel underneath the adhesive will be exposed.
[* icon_reminder] Removing the rubber feet will weaken the adhesive making reassembly difficult. Apply new adhesive if you choose to place the rubber feet back on to the device.