Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Bu Adımdaki Değişiklikler

Düzenleyen: Miroslav Djuric

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_caution] In this step, make sure to only disconnect the connector from its socket, and not the entire socket from the interconnect board.
[*
black] Use the tip of a spudger to gently pry the hard drive thermal sensor connector up offaway from its socket on the interconnect board. Make sure to only detach the connector and not the socket that is soldered to the interconnect board.
[* icon_caution] In this step, make sure to only disconnect the connector from its socket, and not the entire socket from the interconnect board.
[*
black] Use the tip of a spudger to gently pry the hard drive thermal sensor connector up offaway from its socket on the interconnect board. Make sure to only detach the connector and not the socket that is soldered to the interconnect board.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 2

Önceki resim yok

Eklendi