Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Don E Humphrey II

Düzenleme onaylandı tarafından Don E Humphrey II


Adım Satırları

[* black] Remove the ribbon cables for the touchpad and keyboard by gently lifting the latch on the connector, then slide the ribbon cable out. Repeat for each cable.
[* black] Verify all ribbon cables are disconnected and out of the way, and lift the keyboard out of the assembly.
-[* black] If desired, replace the keyboard at this time.
+[* black] Replace the keyboard at this time if desired.