iPhone 5 Logic Board Assembly Replacement 10 No'lu Adım Geçmişi

10. Adımdaki Değişiklikler

Düzenleyen: Dominik Schnabelrauch — 5 Tem 2018

Düzenleme onaylandı tarafından Dominik Schnabelrauch

	[* black] Remove the following screws securing the logic board to the rear case:
	[* red] Two 2.3 mm Phillips screws
	[* orange] Two 2.7 mm standoff screws
-	[* icon_note] Standoff screws are best removed with a [product\|IF145-388-5\|standoff screwdriver\|new_window=true] or [product\|IF145-343\|standoff driver bit]. A small flathead screwdriver can also do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.
+	[* icon_note] Standoff screws are best removed using an [product\|IF145-343\|new_window=true] and [product\|IF145-326\|driver handle\|new_window=true].
+	[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.
	[* yellow] One non-magnetic 2.7 mm standoff screw
	[* icon_note] Be sure to put this screw back in its original position at the top of the logic board. A magnetized screw may interfere with the digital compass.