10. Adımdaki Değişiklikler
Düzenleyen: Drtofu —
Düzenlenme reddedildi tarafından Walter Galan
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Remove the following screws securing the logic board to the rear case: | |
| [* red] Two 2.3 mm Phillips screws | |
| - | [* orange] Three 2.7 mm standoff screws |
| + | [* orange] Three 2.7 mm standoff screws. Note that the upper standoff screw is non-magnetic. |
| [* icon_note] These screws have a Phillips bit pattern, but we found the best removal tool to be a 2.5 mm flathead driver. | |
| [* icon_reminder] Reassembly hint: when putting the standoffs back in, use the tip of a spudger like a screwdriver to get them started. |