Ana içeriğe geç

Fix Your Stuff

Right to Repair

Parts & Tools

1. Adımdaki Değişiklikler

Düzenleyen: Blake Klein

Düzenleme onaylandı tarafından Blake Klein

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* icon_note] The pictures shown are taken with the motherboard removed. This is not required for the replacement of the USB module.
[* red] UsingRemove the Phillips Screwdriver #00, remove the 2two 2.8mm Phillips screws that hold the USB module to the assembly#00 screws.
[* red] UsingRemove the Phillips Screwdriver #00, remove the 2two 2.8mm Phillips screws that hold the USB module to the assembly#00 screws.
[* orange] Carefully remove the ZIF connector ribbon cable from the module by lifting up on the latch and pulling the cable out.
[* black] Replace the USB module at this time.