2. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Slide the SSD into the enclosure until the SSD's power and data ports connect with the enclosure's. |
|---|---|
| - | [* icon_note] The SSD's ports connect with the enclosure in only one way. If the ports are not lining up, rotate the SSD and try again. |
| + | [* black] Line up the small SATA connector so that the short side on the SSD matches the short side on the enclosure. |
| + | [* black] Slide the drive in through the front of the enclosure until the SATA connector is fully seated. |
| + | [* icon_note] The SSD connects with the enclosure in only one way. If the connectors are not lining up, rotate the SSD and try again. |