5. Adımdaki Değişiklikler
Düzenleyen: Adam O'Camb —
Düzenleme onaylandı tarafından Adam O'Camb
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Peel the backing off of the adhesive back of the small temperature sensor board. | |
| - | [* black] Adhere the temperature sensor board to an exposed, metal area of the surface of the SSD, as close as possible to the SATA |
| + | [* black] Adhere the temperature sensor board to an exposed, metal area of the surface of the SSD, as close as possible to the SATA connector. |
| [* black] Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure. |