10. Adımdaki Değişiklikler
Düzenleyen: Anthony Kouttron —
Düzenleme onaylandı tarafından Anthony Kouttron
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] After triple checking my CAD, I went ahead and tested my design on a 3D printer. I used a [https://zortrax.com/printers/zortrax-m200/|Zortrax M200] 3D Printer. This is an FDM (Fused Deposition Modeling) printer designed to print parts out of a filament material. In this case ABS ( |
|---|---|
| + | [* black] After triple checking my CAD, I went ahead and tested my design on a 3D printer. I used a [https://zortrax.com/printers/zortrax-m200/|Zortrax M200] 3D Printer. This is an FDM (Fused Deposition Modeling) printer designed to print parts out of a filament material. In this case ABS (Acrylonitrile Butadiene Styrene), was used for the print. |