Ana içeriğe geç

15. Adımdaki Değişiklikler

Düzenleyen: iRobot

Düzenleme onaylandı tarafından iRobot

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Remove the battery by lifting it ''away'' from the speaker and logic board area.
[* icon_caution] Take care not to drag the battery over the lower case assembly, or you may damage the speakers or flex cables.
[* icon_reminder] Before installing your new battery, remove all the remaining adhesive from the MacBook's case.
- [* black] Peel off larger pieces of adhesive using tweezers or gloved fingers.
+ [* black] Peel off larger pieces of adhesive using [product|IF145-020|tweezers] or gloved fingers.
[* black] Scrape away any remaining adhesive with a plastic tool, and clean the underlying areas with adhesive remover or isopropyl alcohol. Wipe in one direction, not back and forth, until all the adhesive residue is gone.
[* icon_note] This can take quite a bit of work, so be patient.