Ana içeriğe geç

Fix Your Stuff

Right to Repair

Parts & Tools

16. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Test your new battery's fit and alignment carefully before installing it.
[* icon_note] Unlike most laptop batteries, the MacBook's battery is precisely contoured to fit the "terraced" shape of the lower case. Each cell must be correctly positioned, or the MacBook may not close correctly and damage may result.
[* black] Your replacement battery may come affixed to a thick plastic top liner to help keep the individual cells in position as you install it. Don't remove this liner until after the battery is installed.
[* black] Ifred] If your battery came with adhesive pre-installed on the bottom, peel away the bottom plastic liner coveringto expose the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as [product|IF317-072-4|Tesa 61395|new_window=true] to the lower case in the areas marked in red.
[* black] Carefully position the battery and dropset it into place. Press and hold each cell firmly for 5-10 seconds to secure it to the lower case. Afterward, peel off the plastic top liner along with any foam padding.
[* icon_remindericon_caution] '''2015 models only''': After reassembly, remember to [guide|107711|connect your MacBook to low-voltage power] before turning it on. Failure to follow these instructions may result in logic board damage.
[* black] Calibrate your new battery before using it: allow it to drain overnight, then charge it to 100% and drain it again until your MacBook Pro shuts down automatically. Charge it again and use it normally.
[* icon_caution] Remember to re-enable your MacBook's '''autoboot''' function. If you notice any unusual behavior or problems after installing your new battery, you may need to [https://support.apple.com/en-gb/HT201295|reset your MacBook's SMC|new_window=true].
[* black] Ifred] If your battery came with adhesive pre-installed on the bottom, peel away the bottom plastic liner coveringto expose the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as [product|IF317-072-4|Tesa 61395|new_window=true] to the lower case in the areas marked in red.
[* black] Carefully position the battery and dropset it into place. Press and hold each cell firmly for 5-10 seconds to secure it to the lower case. Afterward, peel off the plastic top liner along with any foam padding.
[* icon_remindericon_caution] '''2015 models only''': After reassembly, remember to [guide|107711|connect your MacBook to low-voltage power] before turning it on. Failure to follow these instructions may result in logic board damage.
[* black] Calibrate your new battery before using it: allow it to drain overnight, then charge it to 100% and drain it again until your MacBook Pro shuts down automatically. Charge it again and use it normally.
[* icon_caution] Remember to re-enable your MacBook's '''autoboot''' function. If you notice any unusual behavior or problems after installing your new battery, you may need to [https://support.apple.com/en-gb/HT201295|reset your MacBook's SMC|new_window=true].