Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: drewsof

Düzenlenme reddedildi tarafından Adam O'Camb

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Allow the lower EMI shield to hang down from the display.
[* red] Remove the four 7.5 mm T10 Torx screws securing the display to the rear case.
[* icon_note] The screws are recessed, so a thin magnetic screwdriver aids in removal. Most bit driversdrivers, including those from iFixit are too short to reach these screws.
[* icon_note] The screws are recessed, so a thin magnetic screwdriver aids in removal. Most bit driversdrivers, including those from iFixit are too short to reach these screws.