Ana içeriğe geç

Bu Adımdaki Değişiklikler

Düzenleyen: Kyle Hoff

Düzenleme onaylandı tarafından Kyle Hoff

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[* black] Place Karma upside down, with the landing gear facing up
+[* black] Using 2.5mm Hex key screwdriver, loosen, but no not remove completely, all four screws located underneath
+[* black] Pop off the landing component by pushing down with thumbs
+[* black] Caution: there is an internal wire connector so do not pop off the landing gear with too much force
+[* black] Unplug connector

Resim 1

Önceki resim yok

Eklendi