Bu Adımdaki Değişiklikler
Adım Satırları
| - | [* black] Place landing component in same position |
|---|---|
| - | [* black] Re-attach wire connector |
| - | [* black] Tighten all four screws |
| + | [* black] Put new arm on in same position |
| + | [* black] Tighten internal screw |
| + | [* black] Place plate back in original position |
| + | [* black] Push locked connectors back into place |
| + | [* black] Tighten both screws on plate |