Skip to main content

1. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı by Jeff Suovanen

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* icon_note] Before starting this procedure, you must disable your Mac's '''Auto Boot''' feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. [https://www.ifixit.com/Guide/How+to+Disable+Auto+Boot/110034%7CHow|Use this guide] or follow the abbreviated instructions below to disable Auto Boot.
[* black] Power on your Mac and launch '''Terminal'''.
[*[* black] Copy and paste the following command (or type it exactly) into Terminal:
[* black] '''sudo nvram AutoBoot=%00'''
[* black] Press '''[return]'''. If prompted, enter your administrator password and press '''[return]''' again.
[*
icon_note] To launch Terminal, youYou can either use '''Spotlight Search''' or navigate to '''Applications / Utilities''' in Findernow safely power down your Mac and open the bottom case, without it accidentally powering on.
[* icon_reminder] When your repair is complete
and double clickyour Mac is successfully reassembled, re-enable Auto Boot with the Terminal icon.following command:
[* black] '''sudo nvram AutoBoot=%03'''
[*[* black] Copy and paste the following command (or type it exactly) into Terminal:
[* black] '''sudo nvram AutoBoot=%00'''
[* black] Press '''[return]'''. If prompted, enter your administrator password and press '''[return]''' again.
[*
icon_note] To launch Terminal, youYou can either use '''Spotlight Search''' or navigate to '''Applications / Utilities''' in Findernow safely power down your Mac and open the bottom case, without it accidentally powering on.
[* icon_reminder] When your repair is complete
and double clickyour Mac is successfully reassembled, re-enable Auto Boot with the Terminal icon.following command:
[* black] '''sudo nvram AutoBoot=%03'''

Resim 2

Eski Versiyon

Yeni Versiyon

Resim 3

Eski Versiyon

Yeni Versiyon