1. Adımdaki Değişiklikler
Düzenleyen: Jeff Suovanen —
Düzenleme onaylandı tarafından Jeff Suovanen
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* icon_note] Before starting this procedure, you must disable your Mac's ***Auto Boot*** feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. [guide|110034|Use this guide] or follow the abbreviated instructions below to disable Auto Boot. |
|---|---|
| + | [* black] Power on your Mac and launch ***Terminal***. |
| + | [* black] Copy and paste the following command (or type it exactly) into Terminal: |
| + | [* black] ***sudo nvram AutoBoot=%00*** |
| + | [* black] Press ***[return]***. If prompted, enter your administrator password and press ***[return]*** again. |
| + | [* icon_note] You can now safely power down your Mac and open the bottom case, without it accidentally powering on. |
| + | [* icon_reminder] When your repair is complete and your Mac is successfully reassembled, re-enable Auto Boot with the following command: |
| + | [* black] ***sudo nvram AutoBoot=%03*** |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi
Resim 3
Önceki resim yok
Eklendi