Bu Adımdaki Değişiklikler
Düzenleyen: Andrew Bookholt —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Carefully insert a putty knife into the crevice in between the top cover and bottom housing. Start on the left side first. Push the blade down until you meet firm resistance (roughly 3/8 of an inch). | |
| - | [* black] Gently enlarge the existing crevice by |
| + | [* black] Gently enlarge the existing crevice by prying the handle of the putty knife downward and away from the mini. |
| [* icon_note] It helps to start in the middle, then work along the edge until the bottom housing pops up slightly. |