Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Andrew Bookholt

Onay bekleniyor


Adım Satırları

+[* icon_caution] Later in this guide you will remove several recessed Phillips screws. Bit drivers are generally too large to fit in the recesses, so be sure to have a thin shafted Phillips screwdriver on hand.
[* icon_note] First remove the AirPort antenna (the larger of the two), located near the power button.
[* black] Slightly squeeze the two retaining arms toward each other and lift the AirPort antenna off its post.
[* icon_caution] Squeezing the two posts excessively will surely break them off the internal frame. Work delicately.
[* icon_reminder] During reinstallation, you will have to slightly squeeze the two posts together so they fit into the openings on the AirPort antenna board.