2. Adımdaki Değişiklikler
Düzenleyen: Christopher McCormack —
Düzenleme onaylandı tarafından Christopher McCormack
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
[* red] Disconnect the black and white wires attached to the WLAN card by pulling up on the connectors. Label these wires to avoid confusing them with other wires during reassembly. | |
[* orange] During reassembly, the black and white wires reconnect to the WLAN card near the black and white triangles, respectively. | |
[* yellow] Remove the remaining wires from their protective sleeve. | |
- | [* icon_ |
+ | [* icon_reminder] The wires in the sleeve are only used in other Dell laptop models. During reassembly, they do not connect to anything. Just place them back into the sleeve. |