Eşyalarını Tamir Et Topluluk Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: Alia Elias —

Düzenleme onaylandı tarafından Alia Elias

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Removing the Back Housing
-[* red] Remove the seven screws from the back of the phone using the Phillips screwdriver.
-[* black] Separate the back housing from the silver trim around the phone using a nylon spudger.
- [* icon_note] While separating the two pieces, most of the buttons (including the power button) will fall out.
+[* red] Remove the seven screws from the back of the phone using the Phillips #000 screwdriver.
+[* black] Separate the backing from the silver trim around the phone by using a nylon spudger to pry between the two components.
+ [* icon_note] While separating the two components, most of the buttons (including the power button) will fall out.