Ana içeriğe geç

13. Adımdaki Değişiklikler

Düzenleyen: Evan

Düzenleme onaylandı tarafından Evan

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Remove Flash Unit
-[* black] On the back of camera, there are seven screws around the opening through which you can see the back of the CCD & lens assembly. I recommend numbering them with a fine-tip Sharpie & putting corresponding numbers on your project mat to keep the screws straight.
[* black] Unplug flash ribbon.
[* black] Remove screws 6 & 7.
[* black] Remove flash unit from camera (be aware that it contains a capacitor which can give you a jolt if you go sticking things into it).