3. Adımdaki Değişiklikler
Düzenleyen: Pavel Hanak —
Düzenleme onaylandı tarafından Pavel Hanak
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Verify it's really bad mainboard, part 2 | |
| - | [* black] Power up the printer and let it run for at least 10 minutes. |
| - | [* black] You can also check if the original CPU fan works - if it doesn't, then your CPU burned out for sure. See Step 9 as to how. |
| + | [* black] Power up the printer and let it run for at least 10 minutes. Then place your finger to the board on the back side of the CPU (green arrow). If it's hot (>50 degrees Celsius), it means the CPU had burned out. |
| + | [* black] You can also check if the original CPU fan works - if it doesn't, then your CPU burned out for sure. See Step 9 as to how to check. |
| [* icon_caution] Warning! The power inlet and wires are right above the mainboard, be careful or you may get an electric shock! | |
| [* icon_note] This photo shows status LEDs in a fully working printer. Maybe they will help you with diagnostics if your printer has some other problem. |