8. Adımdaki Değişiklikler
Düzenleyen: Pavel Hanak —
Düzenleme onaylandı tarafından Pavel Hanak
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [title] First functionality test |
|---|---|
| + | [* black] Now you should test if the new mainboard helped (i.e. if it really was the source of the fault). |
| + | [* black] Connect a PS/2 keyboard and a monitor with VGA input to the appropriate connectors and turn the monitor on. Then plug in the power cord to the printer and turn it on. The mainboard should beep, show BIOS logo and then boot into printer firmware, similar to the second photo. Also, the small display at the front of the printer should work now. |
| + | [* icon_note] If you encounter problems, keep in mind it's like troubleshooting any normal PC - check loose for cables, bad power supply, faulty memory or HDD, BIOS errors etc. |