| - | [title] Check that the new fan works |
|---|
| - | [* black] When the printer is running, you should check that you've mounted and plugged the new CPU fan correctly. You can see it rotating with a small mirror or you can carefully feel it with your finger, like in the photo. |
|---|
| - | [* black] Tie up the nearby cables, so they can't move and block the fan. |
|---|
| - | [* icon_caution] Warning! The power inlet and wires are right above the mainboard, be careful or you may get an electric shock! |
|---|
| + | [title] Verify Proper Fan Operation |
|---|
| + | [* black] After the printer is running, confirm that the new CPU fan is mounted and plugged in correctly. You can check if it is rotating by using a small mirror or by carefully feeling it with your finger, as shown in the photo. |
|---|
| + | [* black] Tie up nearby cables to prevent them from moving and blocking the fan. |
|---|
| + | [* icon_caution] Caution: The power inlet and wires are located above the mainboard. Be sure to exercise caution and take necessary safety precautions to avoid the risk of electric shock. |
|---|